contact us +44(0)1865 596 112


Menu

Enve SES 2.2 - Industry Nine i9 Torch Rear Wheel - Custom

$2,381.25
1,600.00 GBP

All prices are VAT Free

Customise Product
Customise
  • Choose size:
  • Build Kit:
  • Wheels:
  • Width:
  • Colour:
  • Freehub Body:
  • Spokes:
In stock.
ADD TO BASKET
Total: $2,381.25 ($2,381.25 Exc. VAT)

The Smart ENVE System 2.2 is the ultimate climbing wheel with aerodynamic properties that refine stability in the most extreme wind and weather conditions.

As such, lightweight trumps drag reduction with the SES 2.2. The SES 2.2 underwent in-frame development in the Mercedes GP-Petronas wind tunnel in order to define the final shape of the rim. Unlike the other SES wheel sets, the SES 2.2 features the same rim geometry front to rear whereas its SES counterparts have dissimilar rim width and depth front to rear in order to maximize aerodynamic efficiency. In terms of tire fitment, the SES 2.2 is developed to be used with 25mm tires and the clincher version of the rims is tubeless compatible. Because the SES 2.2 is designed to be ridden through the mountains, it was important up the performance levels of our molded brake track texture technology. As such, the SES 2.2 is the first SES rim to feature our new molded in brake track texture. This new brake track texture improves braking performance by as much as 30% over the previous brake track and performs as well in wet conditions as it does in dry. Each SES 2.2 wheel set includes 2 pair of our new black brake pads which have been specially formulated to improve braking power, modulation, and wet weather performance. The combination of the new brake track and black brake pad compound deliver the ultimate in rim brake technology. The SES 2.2 debuted in the pro peloton at the 2015 Tour de France under Team Dimension Data (formerly Team MTN-Qhubeka).

Features:

The Torch road hub features all of the advantages of the Torch freehub -low drag, low weight, and the ultimate in freehub compatibility- tied into a traditional, "Classic" hub.

Road hubs use the same drive ring and pawls as the mountain hubs. However, we reduced the pawl count to 3 instead of 6 for lower drag and weight while still achieving an industry leading (for road hubs) 6 degree engagement.  Relocated bearings, and a new freehub seal reduce freehub drag while coasting.  

The Torch road hubs now feature custom Teflon contact seals for the end caps, which we manufacture in-house. They fully seal the hubs from mud and water - tight enough for a muddy CX season, but smooth enough for drag-free road miles.

Weight

  • Front hub 96-99g
  • Rear hub 235-243g
  • 331-342g/hubset

Varies depending on hole count, bearings, and freehub spec.
Driver: Shimano HG, SRAM HG or XD-R or Campy
6 degree engagement, 3 pawl freehub, 60 point drivering

Front Axles: QR 100mm
Rear Axles: QR 130mm

Colour: Custom

Material: Carbon

The Torch road hub features all of the advantages of the Torch freehub -low drag, low weight, and the ultimate in freehub compatibility- tied into a traditional, "Classic" hub.

Road hubs use the same drive ring and pawls as the mountain hubs. However, we reduced the pawl count to 3 instead of 6 for lower drag and weight while still achieving an industry leading (for road hubs) 6 degree engagement.  Relocated bearings, and a new freehub seal reduce freehub drag while coasting.  

The Torch road hubs now feature custom Teflon contact seals for the end caps, which we manufacture in-house. They fully seal the hubs from mud and water - tight enough for a muddy CX season, but smooth enough for drag-free road miles.

Weight

  • Front hub 96-99g
  • Rear hub 235-243g
  • 331-342g/hubset

Varies depending on hole count, bearings, and freehub spec.
Driver: Shimano HG, SRAM HG or XD-R or Campy
6 degree engagement, 3 pawl freehub, 60 point drivering

Front Axles: QR 100mm
Rear Axles: QR 130mm

Colour: Custom

Brand: Enve

Product code: SES22i9

 
Note : Australian dolar equivalents are based on hourly LIVE conversions using currencylayer.com. UBYK do not accept any responsibility for the accuracy of the conversions and are indicative only. Actual conversion rates will be determined at the time the transaction is completed and based on the the conversion rates of the company facilitating the transaction.